Nuanced dilute doping strategy enables high-performance GeTe thermoelectrics.

In thermoelectrics, doping is essential to augment the figure of merit. Traditional strategy, predominantly heavy doping, aims to optimize carrier concentration and restrain lattice thermal conductivity. However, this tactic can severely hamper carrier transport due to pronounced point defect scattering, particularly in materials with inherently low carrier mean-free-path. Conversely, dilute doping, although minimally affecting carrier mobility, frequently fails to optimize other vital thermoelectric parameters. Herein, we present a more nuanced dilute doping strategy in GeTe, leveraging the multifaceted roles of small-size metal atoms. A mere 4% CuPbSbTe3 introduction into GeTe swiftly suppresses rhombohedral distortion and optimizes carrier concentration through the aid of Cu interstitials. Additionally, the formation of multiscale microstructures, including zero-dimensional Cu interstitials, one-dimensional dislocations, two-dimensional planar defects, and three-dimensional nanoscale amorphous GeO2 and Cu2GeTe3 precipitates, along with the ensuing lattice softening, contributes to an ultralow lattice thermal conductivity. Intriguingly, dilute CuPbSbTe3 doping incurs only a marginal decrease in carrier mobility. Subsequent trace Cd doping, employed to alleviate the bipolar effect and align the valence bands, yields an impressive figure-of-merit of 2.03 at 623 K in (Ge0.97Cd0.03Te)0.96(CuPbSbTe3)0.04. This leads to a high energy-conversion efficiency of 7.9% and a significant power density of 3.44 W cm-2 at a temperature difference of 500 K. These results underscore the invaluable insights gained into the constructive role of nuanced dilute doping in the concurrent tuning of carrier and phonon transport in GeTe and other thermoelectric materials.

Inhibiting Mg Diffusion and Evaporation by Forming Mg-Rich Reservoir at Grain Boundaries Improves the Thermal Stability of N-Type Mg3 Sb2 Thermoelectrics.

N-type Mg3 Sb2 -based thermoelectric materials show great promise in power generation due to their mechanical robustness, low cost of Mg, and high figure of merit (ZT) over a wide range of temperatures. However, their poor thermal stability hinders their practical applications. Here, MgB2 is introduced to improve the thermal stability of n-type Mg3 Sb2 . Enabled by MgB2 decomposition, extra Mg can be released into the matrix for Mg compensation thermodynamically, and secondary phases of Mg─B compounds can kinetically prevent Mg diffusion along grain boundaries. These synergetic effects inhibit the formation of Mg vacancies at elevated temperatures, thereby enhancing the thermal stability of n-type Mg3 Sb2 . Consequently, the Mg3.05 (Sb0.75 Bi0.25 )1.99 Te0.01 (MgB2 )0.03 sample exhibits negligible variation in thermoelectric performance during the 120-hour continuous measurement at 673 K. Moreover, the ZT of n-type Mg3 Sb2 can be maintained by adding MgB2 , reaching a high average ZT of ≈1.1 within 300-723 K. An eight-pair Mg3 Sb2 -GeTe-based thermoelectric device is also fabricated, achieving an energy conversion efficiency of ≈5.7% at a temperature difference of 438 K with good thermal stability. This work paves a new way to enhance the long-term thermal stability of n-type Mg3 Sb2 -based alloys and other thermoelectrics for practical applications.

Comparison of Air-charged Catheter and Water-filled Catheter in Female Urethral Pressure Profile.

OBJECTIVE: To compared the maximum urethral pressure (Pura@max) and functional urethral length (FUL) obtained with water-filled catheters and air-charged catheters during female urethral pressure profile (UPP) in a retrospective study. PATIENTS AND METHODS: One hundred and five female patients were enrolled in our investigation. At Beijing Chao-Yang Hospital, patients who had lower urinary tract dysfunction underwent UPP using a modified UPP equipment. In one UPP, both a water-filled catheter (WFC) and an air-charged catheter (ACC) were employed simultaneously. The paired t test was used to compare the differences between the two systems. Bias and correlations between the two systems were analyzed according to the American Clinical and Laboratory Standardization Institute (CLSI) EP9-A3 recommendations. RESULTS: There were 105 female participants in this study. The patients were 55.5 ± 14.2years old on average. By using the ACC and WFC systems, the mean FUL was determined to be 39.7 ± 16.2 mm and 33.9 ± 13.9 mm, respectively. The FUL findings of two systems differed significantly from one another (P < .01), and a linear fit with R2 = 0.94 indicates a strong linear correlation. The findings of the maximum urethral pressure (Pura@max) measurements made by the ACC and WFC systems, respectively, were 134.3 ± 39.1cmH2O and 99.2 ± 27.6cmH2O, are substantially different (P < .01), and the linear fit R2 = 0.67. The Pura@max of two systems did not linearly correlate with one another. CONCLUSION: For UPP, ACCs often provide higher readings than WFCs, and there is a significant difference in the readings between the two systems. The pressure values derived from the two systems do not correlate, although the FUL does have a significant linear correlation. Results from the ACC and WFC cannot be used interchangeably.

Simultaneous Morphology and Band Structure Manipulation of BiOBr by Te Doping for Enhanced Photocatalytic Oxygen Evolution.

The photocatalytic oxygen evolution of bismuth oxybromide (BiOBr) is greatly hindered by its low visible-light response and high electron-hole recombination. Nonmetal doping can effectively alleviate these issues, leading to improvement in photocatalytic performance. Herein, Bi2Te3 was introduced as both the Te doping source and the morphology-control template to improve the photocatalytic performance of BiOBr. Appropriate amounts of Te are critical to maintain the ultrathin plate-like structure of BiOBr, whereas excessive Te results in the formation of a flower-like architecture. Oxygen evolution activity disclosed that a plate-like structure is essential for realizing higher performance owing to sufficient light utilization and efficient charge separation. An optimal oxygen evolution rate of 368.0 µmol h-1 g-1 was achieved for the Te-doped sample, which is 2.3-fold as that of the undoped BiOBr (158.9 µmol h-1 g-1). Theoretical calculations demonstrated that Te doping can induce impurity levels above the valence band of BiOBr, which slightly narrowed the band gap and strengthened the light absorption in the range of 400-800 nm. More importantly, Te dopants could act as shallow traps for confining the excited electrons, thus prolonging the carrier lifetime. This work provides a novel strategy to prepare highly efficient photocatalysts by simultaneously realizing morphology manipulation and nonmetal doping.

Purification and characterization of a novel immunoregulatory peptide from Sipunculus nudus L. protein.

This study aimed to purify and characterize immunoregulatory peptides from Sipunculus nudus L. and to explore the underlying mechanisms. Ultrafiltration, gel filtration chromatography, and reverse phase high-performance liquid chromatography (RP-HPLC) were used to purify the peptide following enzymatic hydrolysis. Rates of lymphocyte proliferation and phagocytosis as well as nitric oxide (NO) production levels were used as indicators of immunoregulatory activity to screen the fractions. The amino acid sequence of the peptide, designated as SNLP, was identified as Arg-Val-Lys-Gly-Lys-Ile-Leu-Ala-Lys-Arg-Leu-Asn (RVKGKILAKRLN) by liquid chromatography-tandem mass spectrometry (LC-MS/MS). Treatment with the synthetic SNLP increased the proliferation and phagocytosis of RAW 264.7 macrophages and promoted the secretion of tumor necrosis factor-ɑ (TNF-α), interleukin-6 (IL-6), interleukin-1ß (IL-1ß), and NO levels. The mRNA levels of these cytokines and iNOS were also increased by SNLP. Our results provide preliminary evidence suggesting that SNLP acts as a dual immunomodulatory peptide with immunostimulatory and anti-inflammatory activities. In summary, SNLP derived from Sipunculus nudus L. is a potent immunoregulatory peptide and represents a potential functional food or immunoregulatory drug.

Two-step phase manipulation by tailoring chemical bonds results in high-performance GeSe thermoelectrics.

In thermoelectrics, phase engineering serves a crucial function in determining the power factor by affecting the band degeneracy. However, for low-symmetry compounds, the mainstream one-step phase manipulation strategy, depending solely on the valley or orbital degeneracy, is inadequate to attain a high density-of-states effective mass and exceptional zT. Here, we employ a distinctive two-step phase manipulation strategy through stepwise tailoring chemical bonds in GeSe. Initially, we amplify the valley degeneracy via CdTe alloying, which elevates the crystal symmetry from a covalently bonded orthorhombic to a metavalently bonded rhombohedral phase by significantly suppressing the Peierls distortion. Subsequently, we incorporate Pb to trigger the convergence of multivalence bands and further enhance the density-of-states effective mass by moderately restraining the Peierls distortion. Additionally, the atypical metavalent bonding in rhombohedral GeSe enables a high Ge vacancy concentration and a small band effective mass, leading to increased carrier concentration and mobility. This weak chemical bond along with strong lattice anharmonicity also reduces lattice thermal conductivity. Consequently, this unique property ensemble contributes to an outstanding zT of 0.9 at 773 K for Ge0.80Pb0.20Se(CdTe)0.25. This work underscores the pivotal role of the two-step phase manipulation by stepwise tailoring of chemical bonds in improving the thermoelectric performance of p-bonded chalcogenides.

Adherence to diabetes risk reduction diet and the risk of head and neck cancer: a prospective study of 101,755 American adults.

Background: Adherence to the diabetes risk reduction diet (DRRD) may potentially reduce the risk of developing head and neck cancer (HNC) as the diet includes fruits and limits red and processed meats, known risk factors for HNC. However, there is currently no epidemiological research to investigate this potential association. Methods: The present study utilized data on demographics, lifestyles, medications, and diets of participants from the Prostate, Lung, Colorectal, and Ovarian (PLCO) Cancer Screening Trial to explore the potential association between adherence to DRRD and the risk of HNC. We used a DRRD score to evaluate adherence to the dietary pattern and employed Cox regression analysis to calculate hazard ratios (HRs) and 95% confidence intervals (CIs) for HNC risk. Several subgroup analyses were carried out to identify potential effect modifiers, and multiple sensitivity analyses were performed to evaluate the stability of the correlation. The nine components of the DRRD was assessed separately for its association with the risk of HNC. Results: During a mean follow up of 8.84 years, 279 cases of HNC were observed. DDRD score was found to be inversely associated with the risk of HNC (HR Q4 vs. Q1: 0.582; 95% CI: 0.396, 0.856; p = 0.005 for trend) in a linear dose-response manner (p = 0.211 for non-linearity). Subgroup analysis indicated this inverse correlation was more pronounced among participants who had never smoked (HRQ4 vs. Q1: 0.193; 95% CI: 0.073, 0.511; p < 0.001 for trend) compared to current or former smokers (p = 0.044 for interaction). The primary association of DDRD and HNC risk remained robust after several sensitivity analyses. Regarding the individual components of DRRD, an inverse association was also observed between the risk of HNC and increased intake of cereal fiber and whole fruit (all p < 0.05 for trend). Conclusion: Our findings provide evidence that following the DRRD pattern may reduce the risk of NHC, especially for non-smokers.

LRRC59 serves as a novel biomarker for predicting the progression and prognosis of bladder cancer.

BACKGROUND: Leucine-rich repeat-containing protein 59 (LRRC59) is an endoplasmic reticulum membrane protein involved in various cancers, but its role in bladder cancer (BC) has not been reported. The aim of the present study was to investigate the role of LRRC59 protein in BC progression and prognosis. METHODS: The expression profile and clinical significance were retrieved from BC patients in the Cancer Genome Atlas database. The methylation status of LRRC59 was analyzed by UALCAN and MethSurv databases. Potential signaling pathways and biological functions were explored by functional enrichment analysis. Immunocyte infiltration was evaluated by CIBERSORT analysis. The prognostic value of LRRC59 was evaluated by Kaplan-Meier and Cox regression analyses. Overall survival (OS) was predicted by the nomogram plot established in this study. LRRC59 expression in 10 pairs BC and adjacent noncancerous tissues were analyzed by immunohistochemistry (IHC). Cell proliferation, migration, and invasion were detected by CCK8, colony formation assay, transwell assay, and cell scratch assay, respectively. Proteins related to epithelial-mesenchymal transition and apoptosis were detected by western blot. RESULTS: LRRC59 overexpression significantly decreased OS, disease-specific survival, and progress-free interval of BC patients. LRRC59 was a prognostic marker for OS and its hypomethylation status signified a poor prognosis. LRRC59 overexpression was correlated with infiltration of resting memory CD4 T cells, memory activated CD4 T cells, resting NK cells, macrophages M0, M1, M2, and neutrophils. IHC showed that the LRRC59 expression in BC tissue was significantly higher than that in adjacent noncancerous tissue. Knockdown of LRRC59 expression inhibited the proliferation of BC cells and reduced their migratory ability. Western blot showed that Snail and vimentin protein expressions decreased, while E-cadherin expressions increased. CONCLUSIONS: LRRC59 expression can predict the outcome of BC independently and serve as a new biomarker for diagnosis.

Effect of Piper nigrum essential oil in dextran sulfate sodium (DSS)-induced colitis and its potential mechanisms.

BACKGROUND: Piper nigrum essential oil (PnEO) possesses pleasant aroma, unique flavor, and various bioactivities; however, its role against colitis remains unclear. PURPOSE: In this study, we investigated the role of PnEO in relieving colitis and explored its potential mechanisms in a mouse model of dextran sulfate sodium (DSS)-induced colitis. METHODS: Initially, we identified and quantified the components of PnEO by gas chromatography-mass spectrometry (GC-MS). Subsequently, we investigated the protective role of PnEO (50 and 200 mg/kg) in DSS-induced colitis in mice by evaluating disease activity index (DAI) scores and colon length, and performing histological analyses. Eyeball blood was collected and cytokines were determined using ELISA kits. The anti-inflammatory mechanisms of PnEO were analyzed by western blot (WB) and immunohistochemistry (IHC). The intestinal barrier function was evaluated according to tight junction (TJ) protein mRNA levels. We used 16S rRNA gene sequencing to analyze the intestinal microflora of mouse cecal contents. RESULTS: Supplementation with PnEO (50 and 200 mg/kg) increased colon length and improved colon histopathology. PnEO regulated inflammatory responses by downregulating TLR4/MAPKs activation, thereby reducing the release of cytokines and mediators. Moreover, it also protected the intestinal barrier through enhancing the expression of claudin-1, claudin-3, occludin, ZO-1, and mucin 2. 16S rRNA gene sequencing revealed that PnEO (200 mg/kg) decreased the abundance of Akkermansia in the gut microbiome. CONCLUSION: PnEO treatment (50 and 200 mg/kg) relieved DSS-induced colitis by inhibiting TLR4/MAPK pathway and protecting intestinal barrier, and high-dose PnEO exhibited better effects. Moreover, PnEO (200 mg/kg) regulated key compositions of the gut microbiome, which indicated that it had therapeutic potential for sustaining gut health to lower the risk of colitis.

Gibbs Adsorption and Zener Pinning Enable Mechanically Robust High-Performance Bi2 Te3 -Based Thermoelectric Devices.

Bi2 Te3 -based alloys have great market demand in miniaturized thermoelectric (TE) devices for solid-state refrigeration and power generation. However, their poor mechanical properties increase the fabrication cost and decrease the service durability. Here, this work reports on strengthened mechanical robustness in Bi2 Te3 -based alloys due to thermodynamic Gibbs adsorption and kinetic Zener pinning at grain boundaries enabled by MgB2 decomposition. These effects result in much-refined grain size and twofold enhancement of the compressive strength and Vickers hardness in (Bi0.5 Sb1.5 Te3 )0.97 (MgB2 )0.03 compared with that of traditional powder-metallurgy-derived Bi0.5 Sb1.5 Te3 . High mechanical properties enable excellent cutting machinability in the MgB2 -added samples, showing no missing corners or cracks. Moreover, adding MgB2 facilitates the simultaneous optimization of electron and phonon transport for enhancing the TE figure of merit (ZT). By further optimizing the Bi/Sb ratio, the sample (Bi0.4 Sb1.6 Te3 )0.97 (MgB2 )0.03 shows a maximum ZT of ≈1.3 at 350 K and an average ZT of 1.1 within 300-473 K. As a consequence, robust TE devices with an energy conversion efficiency of 4.2% at a temperature difference of 215 K are fabricated. This work paves a new way for enhancing the machinability and durability of TE materials, which is especially promising for miniature devices.

Mg Compensating Design in the Melting-Sintering Method For High-Performance Mg3 (Bi, Sb)2 Thermoelectric Devices.

N-type Mg3 (Bi, Sb)2 -based thermoelectric (TE) alloys show great promise for solid-state power generation and refrigeration, owing to their excellent figure-of-merit (ZT) and using cheap Mg. However, their rigorous preparation conditions and poor thermal stability limit their large-scale applications. Here, this work develops an Mg compensating strategy to realize n-type Mg3 (Bi, Sb)2 by a facile melting-sintering approach. "2D roadmaps" of TE parameters versus sintering temperature and time are plotted to understand the Mg-vacancy-formation and Mg-diffusion mechanisms. Under this guidance, high weight mobility of 347 cm2  V-1  s-1 and power factor of 34 µW cm-1  K-2 can be obtained for Mg3.05 Bi1.99 Te0.01 , and a peak ZT≈1.55 at 723 K and average ZT≈1.25 within 323-723 K can be obtained for Mg3.05 (Sb0.75 Bi0.25 )1.99 Te0.01 . Moreover, this Mg compensating strategy can also improve the interfacial connecting and thermal stability of corresponding Mg3 (Bi, Sb)2 /Fe TE legs. As a consequence, this work fabricates an 8-pair Mg3 Sb2 -GeTe-based power-generation device reaching an energy conversion efficiency of ≈5.0% at a temperature difference of 439 K, and a one-pair Mg3 Sb2 -Bi2 Te3 -based cooling device reaching -10.7 °C at the cold side. This work paves a facile way to obtain Mg3 Sb2 -based TE devices at low cost and also provides a guide to optimize the off-stoichiometric defects in other TE materials.

High Pressure Drives Microstructure Modification and zT Enhancement in Bismuth Telluride-Based Alloys.

Manipulating and integrating the microstructures at different scales is crucial to tune the electrical and thermal properties of a given compound. High-pressure sintering can modify the multiscale microstructures and thus empower the cutting-edge thermoelectric performance. In this work, the high-pressure sintering technique followed by annealing is adopted to prepare Gd-doped p-type (Bi0.2Sb0.8)2(Te0.97Se0.03)3 alloys. First, the high energy of high-pressure sintering promotes the reduction of grain size, thus increasing the content of 2D grain boundaries. Next, high-pressure sintering induces strong interior strain, where 1D dense dislocations are generated near the strain field. More interestingly, the rare-earth element Gd with a high melting temperature is dissolved into the matrix via high-pressure sintering, thus promoting the formation of 0D extrinsic point defects. This concurrently improves the carrier concentration and density-of-state effective mass, resulting in an enhanced power factor. In addition, the integrated 0D point defects, 1D dislocations, and 2D grain boundaries by high-pressure sintering strengthen phonon scattering, thereby achieving a low lattice thermal conductivity of 0.5 Wm-1 K-1 at 348 K. Consequently, a maximum zT value of ∼1.1 at 348 K is achieved in the 0.4 at % Gd-doped (Bi0.2Sb0.8)2(Te0.97Se0.03)3 sample. This work demonstrates that high-pressure sintering enables microstructure modification to enhance the thermoelectric performance of Bi2Te3-based and other bulk materials.

FNBP4 is a Potential Biomarker Associated with Cuproptosis and Promotes Tumor Progression in Hepatocellular Carcinoma.

Background: Hepatocellular carcinoma (HCC) is one of the most common malignant tumors that lacks an efficient therapeutic approach because of its elusive molecular mechanisms. This study aimed to investigate the biological function and potential mechanism of formin-binding protein 4 (FNBP4) in HCC. Methods: FNBP4 expression in tissues and cells were detected by quantitative real-time PCR (qRT‒PCR), Western blot, and immunohistochemistry (IHC). The Kaplan-Meier method was used to explore the correlation between the FNBP4 expression and clinical survival. MTT, EdU incorporation, colony formation, and Transwell assays were performed to evaluate the function of FNBP4 in cell proliferation and migration in vitro. Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway analysis was used to explore the potential mechanism of FNBP4. The prognostic risk signature and nomogram were constructed to demonstrate the prognostic value of FNBP4. Results: We found that FNBP4 was upregulated in patients with HCC and associated with poor overall survival (OS). Furthermore, knockdown of FNBP4 inhibited the proliferation and migration in HCC cells. Then, we performed a KEGG pathway analysis of the coexpressed genes associated with FNBP4 and found that FNBP4 may be associated with tumor-related signaling pathways and cuproptosis. We verified that FNBP4 could cause cell cycle progression and inactivation of the hippo signaling pathway. A prognostic risk signature containing three FNBP4-related differentially expressed cuproptosis regulators (DECRs) was established and can be used as an independent risk factor to evaluate the prognosis of patients with HCC. In addition, a nomogram including a risk score and clinicopathological factors was used to predict patient survival probabilities. Conclusion: FNBP4, as a potential biomarker associated with cuproptosis, promotes HCC cell proliferation and metastasis. We provide a new potential strategy for HCC treatment by targeting FNBP4.

ANXA10 is a prognostic biomarker and suppressor of hepatocellular carcinoma: a bioinformatics analysis and experimental validation.

Liver hepatocellular carcinoma (LIHC) is one of the main cancers worldwide and has high morbidity and mortality rates. Although previous studies have shown that ANXA10 is expressed at low levels in LIHC tumor tissues, the biological function of ANXA10 in LIHC is still unclear. Therefore, we utilized TCGA, TIMER, GEPIA2, TISIDB, LinkedOmics, ssGSEA algorithms and CIBERSORT methodology to preliminarily evaluate the potential mechanism of ANXA10 in LIHC. In vitro experiments were used to further verify some functions of ANXA10. Consequently, we found that ANXA10 mRNA/protein expression was downregulated in LIHC tissue compared to normal tissue. ANXA10 was significantly linked with clinicopathological features, immunocytes, multiple cancer-related pathways, m6A modification and a ceRNA network. A three-gene prognostic signature rooted in ANXA10-related immunomodulators was determined and found to be an independent prognostic predictor. A nomogram was constructed to predict survival with good accuracy. Additionally, in vitro trials revealed that ANXA10 upregulation inhibited LIHC cell proliferation and migration. This study reveals that ANXA10 may serve as a prognostic marker and promising therapeutic target in LIHC clinical practice through various biologic functions.

Effects of cold atmospheric plasma on endogenous enzyme activity and muscle protein oxidation in Trachinotus ovatus.

In this study, we investigated the effects of cold atmospheric plasma (CAP) technology on endogenous enzyme characteristics and muscle protein properties of the golden pomfret (Trachinotus ovatus) under different treatment power and time conditions. Results showed that the enzymatic activity of cathepsin B, L, and calpain in crude protease extracts (CPE) decreased significantly as the treatment power and treatment time of CAP increased (p < 0.05). Oxidative degradation of the CPE after exposure to CAP resulted in significant changes in the structure, total sulfhydryl, and carbonyl content of the CPE (p < 0.05). CAP of an appropriate intensity resulted in significant improvements in the color parameters, hydration properties, and textural property parameters of muscle proteins (p < 0.05). These results suggest that CAP, as a non-thermophysical modification technique, can inhibit the activity of endogenous enzymes as well as alter the protein function in food.

[Effects of serum containing Shenrong Pill on oxidative stress damage in mouse Leydig cells].

OBJECTIVE: To explore the mechanism of Shenrong pills in improving oligoasthenospermia by inhibiting oxidative stress-induced Leydig cell apoptosis in mouse testis. METHODS: The oxidative stress model of mouse Leydig cells (TM3) was induced by 3% hydrogen peroxide (H2O2) of 600 µmol/L, and then TM3 cells were treated with 7.5%, 10% and 12.5% serum containing Shenrong pills, respectively. TM3 cells were divided into normal control group, model group, and low, medium and high dose groups of Shenrong pills containing serum. The cell viability of TM3 after treatment was detected by CCK-8 method, reactive oxygen species (ROS) were detected by DCFH probe method, and SOD-1, CAT, GSH-px, MDA and LPO in cell lysates were detected by ELISA method. The changes of apoptosis-related proteins Bcl-2, Bax in cell lysates were detected by Western Blot. RESULTS: After H2O2 treatment, compared with normal control group, cell viability was significantly decreased (P< 0.01), MDA and LPO contents were significantly increased (P<0.01), SOD-1, CAT and GSH-px contents were significantly decreased (P<0.01). Reactive oxygen species (ROS) were significantly increased, the relative expression ratio of Bcl-2 protein was significantly decreased (P<0.01, P<0.05), and the relative expression of Bax protein was increased. After the administration of Shenrong pills containing serum, the above indexes were reversed to varying degrees. CONCLUSION: Shenrong pills can resist oxidative stress, inhibit the apoptosis of TM3 cells in mice, maintain high levels of testosterone required for spermatogenic cells, and improve the sperm quality of mice with oligonasthenospermia.

Purification and Identification of Peptides from Oyster (Crassostrea hongkongensis) Protein Enzymatic Hydrolysates and Their Anti-Skin Photoaging Effects on UVB-Irradiated HaCaT Cells.

This study aimed to purify and identify antiphotoaging peptides from oyster (Crassostrea hongkongensis) protein enzymatic hydrolysates (OPEH) and to investigate the possible mechanism underlying its antiphotoaging effect. Multiple methods (Ultrafiltration, G25 Chromatography, RP-HPLC, and LC/MS/MS) had been used for this purpose, and eventually, two peptides, including WNLNP and RKNEVLGK, were identified. Particularly, WNLNP exerted remarkable antiphotoaging effect on the UVB-irradiated HaCaT photoaged cell model in a dose-dependent manner. WNLNP exerted its protective effect mainly through inhibiting ROS production, decreasing MMP-1 expression, but increasing extracellular pro-collagen I content. Furthermore, WNLNP downregulated p38, JNK, ERK, and p65 phosphorylation in the MAPK/NF-κB signaling pathway and attenuated bax over-expressions but reversed bcl-2 reduction in UVB- irradiated HaCaT cells. The molecular docking analysis showed that WNLNP forms five and seven hydrogen bonds with NF-κB (p65) and MMP-1, respectively. This study suggested that a pentapeptide WNLNP isolated from OPEH had great potential to prevent and regulate skin photoaging.

Functionality of Pea-Grass Carp Co-Precipitated Dual-Protein as Affected by Extraction pH.

Isoelectric solubilisation/co-precipitation (ISP) has been proven to be a better method than blending for preparing plant-animal dual-proteins, which can achieve synergies in the functional properties of heterologous proteins. This paper aims to investigate the effect of extraction pH on the functional properties of co-precipitated dual-protein. The basic composition, subunit composition, solubility, surface hydrophobicity, emulsification and gel properties of co-precipitated dual-protein (Co) prepared from pea and grass carp with pH (2.0, 3.0, 9.0, 10.0 and 11.0) were analysed in this study using ISP. The results showed that the functional properties of Co (Co9, Co10, Co11) prepared by alkali extraction were generally better than those prepared by acid extraction (Co2, Co3). Among them, Co10 has the highest vicilin/legumin α + ß value and solubility, while having the lowest surface hydrophobicity, making its emulsification and gel properties superior to other extraction pH values. This study provides an important method reference for preparing plant-animal Co with exceptional functional properties.

Regulating the Configurational Entropy to Improve the Thermoelectric Properties of (GeTe)1-x(MnZnCdTe3)x Alloys.

In thermoelectrics, entropy engineering as an emerging paradigm-shifting strategy can simultaneously enhance the crystal symmetry, increase the solubility limit of specific elements, and reduce the lattice thermal conductivity. However, the severe lattice distortion in high-entropy materials blocks the carrier transport and hence results in an extremely low carrier mobility. Herein, the design principle for selecting alloying species is introduced as an effective strategy to compensate for the deterioration of carrier mobility in GeTe-based alloys. It demonstrates that high configurational entropy via progressive MnZnCdTe3 and Sb co-alloying can promote the rhombohedral-cubic phase transition temperature toward room temperature, which thus contributes to the enhanced density-of-states effective mass. Combined with the reduced carrier concentration via the suppressed Ge vacancies by high-entropy effect and Sb donor doping, a large Seebeck coefficient is attained. Meanwhile, the severe lattice distortions and micron-sized Zn0.6Cd0.4Te precipitations restrain the lattice thermal conductivity approaching to the theoretical minimum value. Finally, the maximum zT of Ge0.82Sb0.08Te0.90(MnZnCdTe3)0.10 reaches 1.24 at 723 K via the trade-off between the degraded carrier mobility and the improved Seebeck coefficient, as well as the depressed lattice thermal conductivity. These results provide a reference for the implementation of entropy engineering in GeTe and other thermoelectric materials.